Brand: Siniat Model: 100000202
GTEC Joint Tape is designed for use on gypsum plasterboard. It is
suitable for both hand and mechanical applications with Siniat GTEC
Jointing compounds.
Benefits:
Suitable for internal cornersHigh strength eliminates risk of cracking
Specification:
Length150m
MaterialPape..
Brand: Siniat Model: 100000302
A unique shaped C Stud which, when used in a partition system, can give
increased acoustic perfromance over standard C Studs with the same board
linings.
Benefits:
Can improve their overall RwdB performance of a partition by up to 3 dBEngineered slots in the stud create a spring section..
Brand: Siniat Model: 100000301
A unique shaped C Stud which, when used in a partition system, can give
increased acoustic perfromance over standard C Studs with the same board
linings.
Benefits:
Can improve their overall RwdB performance of a partition by up to 3 dBEngineered slots in the stud create a spring section..
Brand: Siniat Model: 100000303
A unique shaped C Stud which, when used in a partition system, can give
increased acoustic perfromance over standard C Studs with the same board
linings.
Benefits:
Can improve their overall RwdB performance of a partition by up to 3 dBEngineered slots in the stud create a spring section..
Brand: Siniat Model: 100000319
Metal clip used in the Siniat GTEC Acoustic Floor System.
Benefits:
Used as part of a system providing minimal addition to floor depthPreformed metal accessory, ready to install out of the boxManufactured to BS EN 14195Reaction to fire A1Applications:
Used within the GTEC Acoustic Flo..
Brand: Siniat Model: 100000297
The GTEC Acoustic Homespan System C Stud is utilised within the GTEC Acoustic Homespan system.
Benefits:
Thinner in width than conventional C StudsIncreased flange length to allow easier fixingHelps provides acoustic laboratory results of 40 RwdBManufactured to BS EN 14195Reaction to fire..
Brand: Siniat Model: 100000298
The GTEC Acoustic Homespan System C Stud is utilised within the GTEC Acoustic Homespan system.
Benefits:
Thinner in width than conventional C StudsIncreased flange length to allow easier fixingHelps provides acoustic laboratory results of 40 RwdBManufactured to BS EN 14195Reaction to fire..
Brand: Siniat Model: 100000300
GTEC Acoustic Homespan Starter Studs are used at wall abutments and at
door openings as part of the GTEC Acoustic Homespan System.
Benefits:
Acts as a starter and end stud, when used in conjunction with the Acoustic Homespan C StudManufactrured to BS EN 14195Reaction to fire A1Applicatio..
Brand: Siniat Model: 100000299
GTEC Acoustic Homespan Starter Studs are used at wall abutments and at
door openings as part of the GTEC Acoustic Homespan System.
Benefits:
Acts as a starter and end stud, when used in conjunction with the Acoustic Homespan C StudManufactrured to BS EN 14195Reaction to fire A1Applicatio..
Brand: Siniat Model: 100000320
Spring steel acoustic brace. For bracing twin wall partitions with minimal acoustic transmission.
Benefits:
Allows for bracing of two studs within a twin partition system,
whilst maintaining high levels of acoustic, thermal and fire performanceManufactrured to BS EN 14195Reaction to fire..
Brand: Siniat Model: 100000321
Spring steel acoustic brace. For bracing twin wall partitions and linings with minimal acoustic transmission.
Benefits:
Allows for 90° bracing of two studs within a twin partition system,
whilst maintaining high levels of acoustic, thermal and fire performanceManufactrured to BS EN 14195..
Brand: Siniat Model: 100000262
Galvanised versatile metal section used in a number of systems.
Benefits:
Available in 3 different sizesMulti purpose profile used in MF Ceiling and Independent Lining systemsManufactured to BS EN 14195Reaction to fire A1
Applications:
Used primarily within the GTEC MF Ceiling sy..